2017 MV Agusta F3 800 RC

2017 MV Agusta F3 800 RC
2017 MV Agusta F3 800 RC

 

2017 MV Agusta F3 800 RC
2017 MV Agusta F3 800 RC

 

2017 MV Agusta F3 800 RC
2017 MV Agusta F3 800 RC

 

2017 MV Agusta F3 800 RC
2017 MV Agusta F3 800 RC

 



 

2017 MV Agusta F3 800 RC Review

 

2017 MV Agusta F3 800 RC on www.Totalmotorcycle.com

 

A road-going replica of the MV Agusta F3 by Jules Cluzel and Lorenzo Zanetti hot from the Schiranna Reparto Corse…

 

A supersport with a chassis and technology of unprecedented sophistication. Since its first appearance, it has emerged as the new technological benchmark in the category, growing to 800 cc to create a new segment in the international supersport market. At the same time, its racing life has been packed with success, notching up more international victories to continue the MV Agusta’s enviable sporting record. This achievement has been backed by a sound team that achieved improved results and image: the Reparto Corse Cluzel and Zanetti set the fans on fire with their sharp F3 RC Tricolori, certainly the most admired and envied motorbikes in the championship. Anyone who gets their hands on a F3 RC special series bike will be able to translate these thrills to roads and track days. The F3 RC, produced in a limited edition of 100 bikes in the 675 configuration and 250 in the meatier 800 configuration, faithfully reproduces the graphics of the Jules Cluzel and Lorenzo Zanetti motorbike. To certify the originality of each bike, every F3RC is autographed by both riders, #16 Cluzel on the right side panel and #87 Lorenzo Zanetti on the left.


 

 

 


 

2017 MV Agusta F3 800 RC www.Totalmotorcycle.com Key Features

 

The bike, produced in a limited edition of 350, is available with the 675 WSS cylinder capacity or the meatier 800 track day version.

 

 

 

 

 

 

 

 

2017 MV Agusta F3 800 RC www.Totalmotorcycle.com Features and Benefits

 

THE ENGINE

 


Offered in two displacements, the F3 RC is the essence of racing. The perfect balance of technology and design, in a very limited production run, consisting of 350 works of art. The incredibly lightweight and compact three-cylinder engine has been further refined and optimized to achieve maximum performance obtaining peak power and torque for both track and road use. F3 675 RC produces 128 hp (94.2 kW) at 14400 rpm and 71 Nm (7.24 kgm) of peak torque at 10900 rpm; The F3 800 reaches even further extremes, producing 148 hp (108.8 kW) at 13000 rpm and 88 Nm (8.97 kgm) of peak torque at 10600 rpm.

ELECTRONICS


The advanced MVICS electronic platform (Motor & Vehicle Integrated Control System) allows the rider to effectivly manage the performance utilizing the Ride by Wire system together with the available multimaps (three predefined maps and one fully customizable map) together with 8 levels of traction control.

CHASSIS


The frame is a composite structure consisting of a lightweight front steel trellis coupled to the aluminum alloy side plates that act as the fulcrum for the iconic single sided swingarm. The suspension, Sachs mono-shock and Marzocchi front forks, have been tuned to keep the chassis in composure at the limit without sacrificing the nimble handling. The high ratio of swingarm length to the wheelbase (576.5/1380 mm) ensures maximum traction and perfect weight distribution.
The racing DNA of the RC model is evident at first glance. The race replica graphics are a tribute to the nuomerous victories obtained by Jules Cluzel and Lorenzo Zanetti in WSS competitions worldwide, and each bike is personally signed by the the riders on the side panels as evidence of their partecipation in the developement of this very exclusive model together with MV Agusta Reparto Corse.

EXCLUSIVE DETAILS


In tribute to the numerous laps and races led and won by MV Agusta in international competitions, a special accessories kit is included with each of the 350 F3 RC replicas. This unique collection of special parts – including the license plate holder and single seat cover – are assembled by hands in the historic Schiranna Factory to enhance the racing heritage of the F3 RC. Also included in the special parts kit is the rear wheel replica stand as well as a dedicated bike cover which protects the elegance of this three-cylinder masterpiece. Each individual F3 RC comes complete with a signed certificate of origin which guarantees the exclusivity of this very unique motorcycle and its unwavering dedication to advanced technology, craftmanship, design and performance.

 

 

 

 

 

 

 

 


 

2017 MV Agusta F3 800 RC – www.Totalmotorcycle.com North American Specifications/Technical Details
US MSRP Price: $18898 USD
Canada MSRP Price: $ See Dealer for Pricing CDN

 

ENGINE
Type Three cylinder, 4 stroke, 12 valve
Timing system “D.O.H.C” with mechanical chain tensioner
Total displacement 798 cm3 (48.7 cu. in.)
Compression ratio 13.3:1
Starting Electric
Bore x stroke 79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power – r.p.m. (at the crankshaft)** 108.8 kW (148 hp) at 13.000 r.p.m.
Max. torque – r.p.m. 88 Nm (8.97 kgm) at 10.600 r.p.m.
Cooling system Cooling with separated liquid and oil
radiators
Engine management system Integrated ignition – injection system MVICS
(Motor & Vehicle Integrated Control System)
with six injectors Engine control unit Eldor
EM2.0, throttle body full drive by wire
Mikuni, pencil-coil with ion-sensing technology,
control of detonation and misfire
Torque control with four maps, Traction
Control with eight levels of intervention
Electronic quick shift MV EAS (Electronically Assisted Shift)
Clutch Wet, multi-disc slipper clutch
Transmission Cassette style; six speed, constant mesh
Primary drive 19/36
Gear ratio
First gear: 13/37
Second gear: 16/34
Third gear: 18/32
Fourth gear: 19/30
Fifth gear: 21/30
Sixth gear: 22/29
Final drive ratio 17/43
ELECTRICAL EQUIPMENT
Voltage 12 V
Alternator 350 W at 5000 r.p.m.
Battery 12 V – 8.6 Ah
DIMENSIONS AND WEIGHT
Wheelbase 1380 mm (54.33 in.)
Overall length 2060 mm (81.01 in.)
Overall width 725 mm (28.54 in.)
Saddle height 805 mm (31.69 in.)
Min. ground clearance 125 mm (4.92 in.)
Trail 99 mm (3.89 in.)
Dry weight 173 kg (381.4 lbs.)
Fuel tank capacity 16,5 l (4.36 U.S. gal.)
PERFORMANCE
Maximum speed* 269.0 km/h (167.1 mph)

 

FRAME
Type ALS Steel tubular trellis
Rear swing arm pivot plates material Aluminium alloy
FRONT SUSPENSION
Type Marzocchi “UPSIDE DOWN” telescopic
hydraulic fork with rebound-compression
damping and spring preload external
and separate adjustment
Fork dia. 43 mm (1.69 in.)
Fork travel 125 mm (4.92 in.)
REAR SUSPENSION
Type Progressive Sachs, single shock
absorber with rebound and compression
damping and spring preload adjustment
Single sided swing arm material Aluminium alloy
Wheel travel 123 mm (4.84 in.)
BRAKES
Front brake Double floating disc with Ø 320 mm
(Ø 12.6 in.) diameter, with steel braking disc
and flange
Front brake caliper Brembo radial-type monobloc,
with 4 pistons Ø 34 mm (Ø 1.34 in.)
Rear brake Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper Brembo with 2 pistons – Ø 34 mm (Ø 1.34 in.)
ABS System Bosch 9 Plus with Race Mode and
RLM (Rear wheel Lift-up Mitigation)
WHEELS
Front: Material/size Aluminium alloy 3.50 ” x 17 ”
Rear: Material/size Aluminium alloy 5.50 ” x 17 ”
TYRES
Front 120/70 – ZR 17 M/C (58 W)
Rear 180/55 – ZR 17 M/C (73 W)
FAIRING
Material Thermoplastic
EQUIPMENT
Anodized aluminum mirror caps kit
Billet aluminum Brake/Clutch levers
Billet aluminum “Sport” License Plate
Holder – Billet aluminum Foot peg kit
Fiberglass rear seat cover
INCLUDED ACCESSORIES
Dedicated Bike cover – Rear paddock stand
Certificate of origin
EMISSIONS
Environmental Standard Euro 3

 

 

 

 

 

 


 

2017 MV Agusta F3 800 RC – www.Totalmotorcycle.com European Specifications/Technical Details
Europe/UK MSRP Price: £14100* GBP (On the road charges of £300 apply to the quoted prices) *Prices may vary from country to country due to local import duties and tax.

 

ENGINE
Type Three cylinder, 4 stroke, 12 valve
Timing system “D.O.H.C” with mechanical chain tensioner
Total displacement 798 cm3 (48.7 cu. in.)
Compression ratio 13.3:1
Starting Electric
Bore x stroke 79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power – r.p.m. (at the crankshaft)** 108.8 kW (148 hp) at 13.000 r.p.m.
Max. torque – r.p.m. 88 Nm (8.97 kgm) at 10.600 r.p.m.
Cooling system Cooling with separated liquid and oil
radiators
Engine management system Integrated ignition – injection system MVICS
(Motor & Vehicle Integrated Control System)
with six injectors Engine control unit Eldor
EM2.0, throttle body full drive by wire
Mikuni, pencil-coil with ion-sensing technology,
control of detonation and misfire
Torque control with four maps, Traction
Control with eight levels of intervention
Electronic quick shift MV EAS (Electronically Assisted Shift)
Clutch Wet, multi-disc slipper clutch
Transmission Cassette style; six speed, constant mesh
Primary drive 19/36
Gear ratio
First gear: 13/37
Second gear: 16/34
Third gear: 18/32
Fourth gear: 19/30
Fifth gear: 21/30
Sixth gear: 22/29
Final drive ratio 17/43
ELECTRICAL EQUIPMENT
Voltage 12 V
Alternator 350 W at 5000 r.p.m.
Battery 12 V – 8.6 Ah
DIMENSIONS AND WEIGHT
Wheelbase 1380 mm (54.33 in.)
Overall length 2060 mm (81.01 in.)
Overall width 725 mm (28.54 in.)
Saddle height 805 mm (31.69 in.)
Min. ground clearance 125 mm (4.92 in.)
Trail 99 mm (3.89 in.)
Dry weight 173 kg (381.4 lbs.)
Fuel tank capacity 16,5 l (4.36 U.S. gal.)
PERFORMANCE
Maximum speed* 269.0 km/h (167.1 mph)

 

FRAME
Type ALS Steel tubular trellis
Rear swing arm pivot plates material Aluminium alloy
FRONT SUSPENSION
Type Marzocchi “UPSIDE DOWN” telescopic
hydraulic fork with rebound-compression
damping and spring preload external
and separate adjustment
Fork dia. 43 mm (1.69 in.)
Fork travel 125 mm (4.92 in.)
REAR SUSPENSION
Type Progressive Sachs, single shock
absorber with rebound and compression
damping and spring preload adjustment
Single sided swing arm material Aluminium alloy
Wheel travel 123 mm (4.84 in.)
BRAKES
Front brake Double floating disc with Ø 320 mm
(Ø 12.6 in.) diameter, with steel braking disc
and flange
Front brake caliper Brembo radial-type monobloc,
with 4 pistons Ø 34 mm (Ø 1.34 in.)
Rear brake Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper Brembo with 2 pistons – Ø 34 mm (Ø 1.34 in.)
ABS System Bosch 9 Plus with Race Mode and
RLM (Rear wheel Lift-up Mitigation)
WHEELS
Front: Material/size Aluminium alloy 3.50 ” x 17 ”
Rear: Material/size Aluminium alloy 5.50 ” x 17 ”
TYRES
Front 120/70 – ZR 17 M/C (58 W)
Rear 180/55 – ZR 17 M/C (73 W)
FAIRING
Material Thermoplastic
EQUIPMENT
Anodized aluminum mirror caps kit
Billet aluminum Brake/Clutch levers
Billet aluminum “Sport” License Plate
Holder – Billet aluminum Foot peg kit
Fiberglass rear seat cover
INCLUDED ACCESSORIES
Dedicated Bike cover – Rear paddock stand
Certificate of origin
EMISSIONS
Environmental Standard Euro 3

 

 

 

 

Manufacturer Specifications and appearance are subject to change without prior notice on Total Motorcycle (TMW).

About Michael Le Pard 11137 Articles
"Mr. Totalmotorcycle". Owner and Founder of Total Motorcycle, the World’s Largest Motorcycle Site with over 425 million readers since 1999. Total Motorcycle is my pride and joy and being able to reach 425 million people has been incredible and I could not have done it without the support of my visitors, readers and members...thank you so much! We are all making a difference to millions of riders worldwide.

Be the first to comment

Leave a Reply